Cabinet hardware
  • Hand-hammered solid brass cabinet pull in polished brass
  • Hand-hammered solid brass T-bar knob and cabinet pulls in polished brass
  • Hand-Hammered solid brass cabinet pull size diagram, 96mm hole spacing
  • Hand-Hammered solid brass cabinet pull size diagram, 128mm hole spacing
  • Hand-Hammered solid brass cabinet pull size diagram, 160mm hole spacing
  • Hand-Hammered solid brass cabinet pull size diagram, 224mm hole spacing
1 6

Hand-Hammered Solid Brass Cabinet Pull, Polished Brass

Hand-Hammered Solid Brass Cabinet Pull, Polished Brass

$28.90
$37.90 $28.90
Sale Sold out

Sold individually. Choose your size and finish, then set the quantity.

Hole spacing
Finish
  • Free US Shipping
  • 100-Day Money-Back Guarantee
  • Secure Checkout
Explore all brass cabinet hardware →

A solid brass bar pull with a hammered texture and a bright, golden Polished Brass finish. The hammered facets catch the light and give kitchen cabinets, drawers, vanities and dressers a handcrafted look.

Features

  • Hammered texture on a round bar
  • Solid brass with a heavy, sturdy feel
  • Polished Brass finish: bright, golden
  • Two-screw mounting, M4 x 25mm screws included

Good to know

  • Sold individually, priced per piece. Order one for each drawer or door.
  • Pairs with the Hand-Hammered round knob and T-bar knob for a matching look.
  • Hole spacing: 96mm (3.78 in), 128mm (5.04 in), 160mm (6.30 in) or 224mm (8.82 in).
  • Also available in Antique Brass.
View full details

Dimensions & details

Made of solid brass with a hammered texture and a Polished Brass finish (bright gold).

  • 96mm (3.78 in) hole spacing: 143mm (5.63 in) overall, 33mm (1.30 in) projection, 139g
  • 128mm (5.04 in) hole spacing: 175mm (6.89 in) overall, 33mm (1.30 in) projection, 167g
  • 160mm (6.30 in) hole spacing: 207mm (8.15 in) overall, 33mm (1.30 in) projection, 193g
  • 224mm (8.82 in) hole spacing: 270mm (10.63 in) overall, 33mm (1.30 in) projection, 240g

Screws & installation

Included: M4 x 25mm (about 1 in) mounting screws.
Mounts with two screws, driven from the back of the door or drawer front.
If your doors or drawer fronts need longer screws, use standard M4 screws of the right length.
Install tip: Measure your existing holes center to center before ordering. Hole spacing is the distance between the two screw holes, not the overall length of the pull.

Finish & care

Finish: Polished Brass, a bright, golden finish on solid brass with a hammered texture.
Care: Wipe with a soft cloth and mild soapy water, then dry. Avoid abrasive pads and harsh chemical cleaners or polishes.

Hand-Hammered solid brass cabinet pull size diagram, 96mm hole spacing

Complete the look

MEASURE ONCE. CHOOSE WELL.

A better fit starts here.

Replacing existing hardware? The distance between screw holes matters more than the length of the handle.

Check your existing holes

For pulls, measure from the center of one screw hole to the center of the other. For knobs, check the existing single hole and surrounding clearance.

Compare all the dimensions

Match the hole spacing first. Then check the overall length, projection and hand clearance against the product’s dimensioned drawing. Convert millimeters to inches by dividing by 25.4.

Check the screws and finish

The included 25mm (1 in) screws suit doors and drawer fronts about 18 to 22mm (3/4 to 7/8 in) thick. For thicker or thinner fronts, use a longer or shorter screw with the same thread.

A few details before you choose

Is this hardware solid brass?

Yes. Every knob and pull is made of solid brass, not brass-plated zinc, and each product page lists its weight per piece. Brushed brass is a satin, warm gold; antique brass is an aged, darker tone; polished brass is bright and golden.

Will my knobs and pulls match?

Yes, within a style. Each style's knobs and pulls come from the same maker in the same finish. Brushed, antique and polished brass are different colors, so choose one finish for a room.

How do I measure for a replacement pull?

Measure from the center of one screw hole to the center of the other. That hole spacing, not the pull's overall length, is the size to match. Most of our bar pulls come in 96mm (3.78 in), 128mm (5.04 in) and 160mm (6.30 in), many also in 224mm (8.82 in) and 320mm (12.60 in), and our cup pulls in 64mm and 76mm (3 in).

Are screws included?

Yes. Knobs come with one screw and pulls with two, about 25mm (1 in) long, which suits most doors and drawer fronts around 3/4 in thick. To clean, wipe with a soft damp cloth and dry; avoid abrasive pads and harsh polishes.

Is shipping free?

Yes, shipping is free on every US order. If you're not happy, you have 100 days to return your order for a full refund.

Shipping policy · Return policy