Ribbed shell
Ribbed Shell Solid Brass Cup Pull, Antique Brass
$18.90 each
Dimensions & details
Screws & installation
Included: 25mm (about 1 in) mounting screw.
Mounts with one screw, driven from the back of the door or drawer front.
For doors or drawer fronts thicker than about 7/8 in, use a longer screw with the same thread as the included one.
Screw length guide by door or drawer front thickness:
9-13mm (0.35-0.51 in) thick: 16mm (0.63 in) screw
15-19mm (0.59-0.75 in) thick: 22mm (0.87 in) screw
18-22mm (0.71-0.87 in) thick: 25mm (0.98 in) screw
23-27mm (0.91-1.06 in) thick: 30mm (1.18 in) screw
28-32mm (1.10-1.26 in) thick: 35mm (1.38 in) screw
33-37mm (1.30-1.46 in) thick: 40mm (1.57 in) screw
Install tip: Knobs need one hole. If your door or drawer has none, mark the spot and drill a hole just wider than the screw.
Finish & care
Finish: Antique Brass, a darkened, aged brushed finish on solid brass.
As is typical of aged finishes, the tone can vary slightly from piece to piece.
Care: Wipe with a soft cloth and mild soapy water, then dry. Avoid abrasive pads and harsh chemical cleaners or polishes.
Complete the look
Ribbed shell
Ribbed Solid Brass Cabinet Pull, Antique Brass
From $27.90 each
Customer Reviews
Overall rating: 5.0 / 5 from 2 reviews.
These are heavy duty, well made and absolutely stunning. Better in person!
really beautiful handles, heavy quality product, I will buy more.
MEASURE ONCE. CHOOSE WELL.
A better fit starts here.
Replacing existing hardware? The distance between screw holes matters more than the length of the handle.
Overall length
Hole spacing · center to center
Illustrative diagram · not to scale
Check your existing holes
For pulls, measure from the center of one screw hole to the center of the other. For knobs, check the existing single hole and surrounding clearance.
Compare all the dimensions
Match the hole spacing first. Then check the overall length, projection and hand clearance against the product’s dimensioned drawing. Convert millimeters to inches by dividing by 25.4.
Check the screws and finish
The included 25mm (1 in) screws suit doors and drawer fronts about 18 to 22mm (3/4 to 7/8 in) thick. For thicker or thinner fronts, use a longer or shorter screw with the same thread.
A few details before you choose
Is this hardware solid brass?
Yes. Every knob and pull is made of solid brass, not brass-plated zinc, and each product page lists its weight per piece. Brushed brass is a satin, warm gold; antique brass is an aged, darker tone.
Will my knobs and pulls match?
Yes, within a style. Each style's knobs and pulls come from the same maker in the same finish. Brushed and antique brass are different colors, so choose one finish for a room.
How do I measure for a replacement pull?
Measure from the center of one screw hole to the center of the other. That hole spacing, not the pull's overall length, is the size to match. Our bar pulls come in 96mm (3.78 in), 128mm (5.04 in) and 160mm (6.30 in), and our cup pulls in 64mm and 76mm (3 in).
Are screws included?
Yes. Knobs come with one screw and pulls with two, about 25mm (1 in) long, which suits most doors and drawer fronts around 3/4 in thick. To clean, wipe with a soft damp cloth and dry; avoid abrasive pads and harsh polishes.
How long does delivery take?
Shipping is free to US addresses and takes 6 to 14 days. If you're not happy, you have 100 days to return your order for a full refund.