Smooth modern
Smooth Solid Brass Round Cabinet Knob, Brushed Brass
From $16.90 each
Dimensions & details
Screws & installation
Included: M4 x 25mm (about 1 in) mounting screws.
Mounts with two screws, driven from the back of the door or drawer front.
If your doors or drawer fronts need longer screws, use standard M4 screws of the right length.
Install tip: Measure your existing holes center to center before ordering. Hole spacing is the distance between the two screw holes, not the overall length of the pull.
Finish & care
Finish: Brushed Brass, a satin, warm-gold brushed finish on solid brass.
Care: Wipe with a soft cloth and mild soapy water, then dry. Avoid abrasive pads and harsh chemical cleaners or polishes.
Complete the look
Smooth modern
Smooth Solid Brass T-Bar Cabinet Knob, Brushed Brass
$15.90 each
MEASURE ONCE. CHOOSE WELL.
A better fit starts here.
Replacing existing hardware? The distance between screw holes matters more than the length of the handle.
Overall length
Hole spacing · center to center
Illustrative diagram · not to scale
Check your existing holes
For pulls, measure from the center of one screw hole to the center of the other. For knobs, check the existing single hole and surrounding clearance.
Compare all the dimensions
Match the hole spacing first. Then check the overall length, projection and hand clearance against the product’s dimensioned drawing. Convert millimeters to inches by dividing by 25.4.
Check the screws and finish
The included 25mm (1 in) screws suit doors and drawer fronts about 18 to 22mm (3/4 to 7/8 in) thick. For thicker or thinner fronts, use a longer or shorter screw with the same thread.
A few details before you choose
Is this hardware solid brass?
Yes. Every knob and pull is made of solid brass, not brass-plated zinc, and each product page lists its weight per piece. Brushed brass is a satin, warm gold; antique brass is an aged, darker tone.
Will my knobs and pulls match?
Yes, within a style. Each style's knobs and pulls come from the same maker in the same finish. Brushed and antique brass are different colors, so choose one finish for a room.
How do I measure for a replacement pull?
Measure from the center of one screw hole to the center of the other. That hole spacing, not the pull's overall length, is the size to match. Our bar pulls come in 96mm (3.78 in), 128mm (5.04 in) and 160mm (6.30 in), and our cup pulls in 64mm and 76mm (3 in).
Are screws included?
Yes. Knobs come with one screw and pulls with two, about 25mm (1 in) long, which suits most doors and drawer fronts around 3/4 in thick. To clean, wipe with a soft damp cloth and dry; avoid abrasive pads and harsh polishes.
How long does delivery take?
Shipping is free to US addresses and takes 6 to 14 days. If you're not happy, you have 100 days to return your order for a full refund.